Recent Posts

1

Driver Sets / Re: Dell Optiplex 3040

« Last post by wysiwyg on August 13, 2018, 02:49:57 PM »

Steps to install the drivers:

1) Plug in the wired network connection before turning on the device (as of the 2017.04.07.0 version, this is a requirement for wired networking)

2) Turn on the computer and immediately press the F12 key multiple times to display the boot device list

3a) Insert the 32bit or 64bit version of the XiniX boot media into the optical drive and select the "CD/DVD/CD-RW Drive" option; press F8 multiple times to display the "XiniX Boot Options" menu
3b) Attach the 32bit or 64bit version of the XiniX boot media into a USB port and select the "USB Storage Device" option; press F8 multiple times to display the "XiniX Boot Options" menu

4) Select "Low Resolution" from the 'XiniX Boot Options" menu

5) In the "Welcome" wizard run through the setup to create a DATA partition and optionally install and desired software

6) When you reach the desktop, a balloon should appear referencing the installation of the more powerful graphical system - click the "Install" button

NOTE: if you miss this step, go into "Access > Local > Software > System" and after it has populated (it will take a minute or two), click the toggle icon and select the "Install" option for the "xorg" entry

7) Go into "Access > Device > Drivers" (using 'now has zen' as password), again waiting a minute or two for population, then the click the toggle icon and select the "Install" option for the "Dell_Optiplex_3040" entry

2

Driver Sets / Re: Dell Optiplex 3040

« Last post by wysiwyg on August 13, 2018, 02:49:33 PM »

Added to repo

3

Driver Sets / Dell Optiplex 3040

« Last post by wysiwyg on August 13, 2018, 02:30:49 PM »

Manufacturer: Dell
Make: Optiplex
Model: 3040
Model No: D11S
Version: 1.0
Peripherals: DVD-RW, sound card, wired network adapter

4

Driver Sets / Re: Dell Optiplex 3020

« Last post by wysiwyg on August 09, 2018, 04:41:14 PM »

Steps to install the drivers:

1) Plug in the wired network connection before turning on the device (as of the 2017.04.07.0 version, this is a requirement for wired networking)

2) Turn on the computer and immediately press the F12 key multiple times to display the boot device list

3a) Insert the 32bit or 64bit version of the XiniX boot media into the optical drive and select the "CD/DVD/CD-RW Drive" option
3b) Attach the 32bit or 64bit version of the XiniX boot media into a USB port and select the "USB Storage Device" option

4) In the "Welcome" wizard run through the setup to create a DATA partition and optionally install and desired software

5) When you reach the desktop, a balloon should appear referencing the installation of the more powerful graphical system - click the "Install" button

NOTE: if you miss this step, go into "Access > Local > Software > System" and after it has populated (it will take a minute or two), click the toggle icon and select the "Install" option for the "xorg" entry

6) Go into "Access > Device > Drivers" (using 'now has zen' as password), again waiting a minute or two for population, then the click the toggle icon and select the "Install" option for the "Dell_Optiplex_3020" entry

5

Driver Sets / Re: Dell Optiplex 3020

« Last post by wysiwyg on August 09, 2018, 04:40:38 PM »

Added to repo

6

Driver Sets / Re: Dell Optiplex 330

« Last post by wysiwyg on August 09, 2018, 04:40:27 PM »

Steps to install the drivers:

1) Plug in the wired network connection before turning on the device (as of the 2017.04.07.0 version, this is a requirement for wired networking)

2) Turn on the computer and immediately press the F12 key multiple times to display the boot device list

3a) Insert the 32bit or 64bit version of the XiniX boot media into the optical drive and select the "CD/DVD/CD-RW Drive" option
3b) Attach the 32bit or 64bit version of the XiniX boot media into a USB port and select the "USB Device" option

4) In the "Welcome" wizard run through the setup to create a DATA partition and optionally install and desired software

5) When you reach the desktop, a balloon should appear referencing the installation of the more powerful graphical system - click the "Install" button

NOTE: if you miss this step, go into "Access > Local > Software > System" and after it has populated (it will take a minute or two), click the toggle icon and select the "Install" option for the "xorg" entry

6) Go into "Access > Device > Drivers" (using 'now has zen' as password), again waiting a minute or two for population, then the click the toggle icon and select the "Install" option for the "Dell_Optiplex_330" entry

7

Driver Sets / Re: Dell Optiplex 330

« Last post by wysiwyg on August 09, 2018, 04:39:54 PM »

Added to repo

8

Driver Sets / Dell Optiplex 3020

« Last post by wysiwyg on August 09, 2018, 04:38:52 PM »

Manufacturer: Dell
Make: Optiplex
Model: 3020
Model No: D08U
Version: 1.0
Peripherals: Speaker, sound card, wired network adapter, optional wireless adapter

9

Driver Sets / Dell Optiplex 330

« Last post by wysiwyg on August 09, 2018, 04:36:36 PM »

Manufacturer: Dell
Make: Optiplex
Model: 330
Model No: DCNE
Version: 1.0
Peripherals: DVD Reader, sound card, wired network adapter

10

Driver Sets / Re: Dell Optiplex 7010

« Last post by wysiwyg on July 03, 2018, 01:02:35 PM »

Steps to install the drivers:

1) Plug in the wired network connection before turning on the device (as of the 2017.04.07.0 version, this is a requirement for wired networking)

2) Turn on the computer and immediately press the F12 key multiple times to display the boot device list

3a) Insert the 32bit or 64bit version of the XiniX boot media into the optical drive and select the "CD/DVD/CD-RW Drive" option
3b) Attach the 32bit or 64bit version of the XiniX boot media into a USB port and select the "USB Storage Device" option; press F8 multiple times to display the "XiniX Boot Options" menu

4) Select "Low Resolution" from the 'XiniX Boot Options" menu

5) In the "Welcome" wizard run through the setup to create a DATA partition and optionally install and desired software

6) When you reach the desktop, a balloon should appear referencing the installation of the more powerful graphical system - click the "Install" button

NOTE: if you miss this step, go into "Access > Local > Software > System" and after it has populated (it will take a minute or two), click the toggle icon and select the "Install" option for the "xorg" entry

7) Go into "Access > Device > Drivers" (using 'now has zen' as password), again waiting a minute or two for population, then the click the toggle icon and select the "Install" option for the "Dell_Inspiron_580" entry