Author Topic: Dell Dimension 8250  (Read 3737 times)

wysiwyg

  • Administrator
  • Jr. Member
  • *****
  • Posts: 88
    • View Profile
Dell Dimension 8250
« on: April 12, 2017, 05:38:55 PM »
Manufacturer: Dell
Make: Dimension
Model: 8250
Model No: DHM
Version: 1.0
Peripherals: DVD Reader, sound card, wired network adapter

wysiwyg

  • Administrator
  • Jr. Member
  • *****
  • Posts: 88
    • View Profile
Re: Dell Dimension 8250
« Reply #1 on: April 12, 2017, 05:39:10 PM »
Added to repo

wysiwyg

  • Administrator
  • Jr. Member
  • *****
  • Posts: 88
    • View Profile
Re: Dell Dimension 8250
« Reply #2 on: April 14, 2017, 04:56:11 PM »
Steps to install the drivers:

1) Plug in the wired network connection before turning on the device (as of the 2017.04.07.0 version, this is a requirement for wired networking)

2) Turn on the computer and immediately press the F12 key multiple times to display the boot device list

3) Insert the 32bit version of the XiniX boot media into the optical drive and select the "IDE CD-ROM Device" option

4) Select "Low Resolution" from the 'XiniX Boot Options" menu

5) In the "Welcome" wizard run through the setup to create a DATA partition and optionally install and desired software

6) When you reach the desktop, a balloon should appear referencing the installation of the more powerful graphical system - click the "Install" button

NOTE: if you miss this step, go into "Access > Local > Software > System" and after it has populated (it will take a minute or two), click the toggle icon and select the "Install" option for the "xorg" entry

7) Go into "Access > Device > Drivers" (using 'now has zen' as password), again waiting a minute or two for population, then the click the toggle icon and select the "Install" option for the "Dell_Dimension_8250" entry

8) Now you can optionally perform step 7 again with the "xf86_video_nv" entry or simply reboot the device twice to have the proper video driver installed

NOTE: the first reboot should boot back into the "Low Resolution" mode, then the "Start XiniX" option for the second time